Available in three styles for use with 86-03 XL motors
PART #2406-2610 has 0 stretch and 30° rake; uses stock length XL front fork (31 ), accepts a flat-side Fat Bob gas tank and uses a 5 or 6 rear fender
PART #2406-2611 has a 2 stretch in the backbone and 4 stretch in the down tubes with a 40° rake; requires a 12 -over (39 ) front fork, does not have fuel tank mounts and uses a 5 or 6 rear fender
PART #2406-2612 has a 3 stretch in the backbone and 6 stretch in the down tubes with a 40° rake; requires 15 -over (42 ) front fork, does not have fuel tank mounts and uses a 5 or 6 fender
Frames are all 1 tubing and include a 3/4 rear axle
Accept a 130-series tire with a belt drive or a 150-series tire with a chain drive
Use PM or GMA rigid rear brake caliper kits
Will also accept XL forward controls or stock mid-controls and most exhaust systems
Frames will require neck post bearing cups, oil tank and battery box (must be purchased separately)